Factory Price For Sintering Molybdenum Crucible - Molybdenum heat shield – WINNERS
Factory Price For Sintering Molybdenum Crucible - Molybdenum heat shield – WINNERS Detail:
Product Description
As the heat insulation component in the vacuum furnace , the biggest function of the heat shield is to block and reflect the heat in the furnace . Therefore , high-purity , accurate size , smooth surface, easy assembly , and reasonable design of heat shields are very important . Molybdenum heat shields are generally produced and processed with 0.5-1.2 mm molybdenum sheets . Generally, there are 4-6 layers. The inner layer of the furnace is made of high-temperature molybdenum TZM material with a thickness of 1.2 mm . Molybdenum strips are used to separate the layers with a space of 7mm . Other molybdenum heat shields are made of 0.5 – 0.8 mm MO1 material . Fasten them with molybdenum screws or molybdenum wire rods.
Product Parameters
| Products name | Molybdenum heat shield |
| Available material | Tungsten、Molybdenum、MoLaTZM、SS304(Stainless steel) |
| Thicknes | 0.2~0.5~1mm |
Design points of metal heat shield
| Material thermal properties | The maximum temperature of the selected metal material should be greater than the ambient working temperature, and the thermal deformation of the metal should be small. When the temperature is higher than 900℃, tungsten, molybdenum and tantalum sheets are generally used. Below 900℃, stainless steel sheet is generally used |
| material blackness | Choose a material with low blackness, the reflection effect of the surface is better, and the surface finish is higher. |
| Material thickness | The thickness of the screen should be as thin as possible. Molybdenum is generally 0.2~0.5mm, and stainless steel sheet is generally 0.5~1mm |
| material price | Under the condition of meeting the working temperature, the cost should be considered |
| Determination of the number of layers of heat shield | With the increase of the number of layers, the heat loss will decrease, the cost will increase, the structure will be complicated, and the vacuum degree will be more difficult to meet the working requirements. Increase to three layers to improve about 8%. The number of layers is not the better, and it should be considered comprehensively. The working temperature is 1000 ℃, and a maximum of 6 layers of screens can be used. |
| Spacing between each layer of heat shield | The spacing should be minimized. The thermal effect of increasing the distance is not large. If the spacing is too small, the two layers of heat shields will be connected together due to thermal deformation. Reduce the spacing, generally about 10mm |
| connection between each layer | Each layer of heat shield should be connected, and it should be ensured that the contact area of the connection is not too large, which will reduce the thermal efficiency. Use bushings and washers to connect each layer. |
| Maintenance of heat shields | The heat shield should be designed to be easily removable, and the thermal expansion and contraction properties of the material should also be considered. |
| The distance between the first screen and the radiating surface | Generally 50~100mm |
| The distance between the outermost screen and the circulating water wall | Generally 100~150mm |
Order Information
Inquiries and orders should include the following information
● Drawing of the Molybdenum isolation screen
● Material of the screen( W, Mo, Ta or SS304)
● Quantity
Product detail pictures:
Related Product Guide:
We not only will try our greatest to supply outstanding services to every shopper, but also are ready to receive any suggestion offered by our buyers for Factory Price For Sintering Molybdenum Crucible - Molybdenum heat shield – WINNERS , The product will supply to all over the world, such as: Mali, Belize, Hungary, We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.
By Edith from Liberia - 2018.06.19 10:42
The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
By Claire from Jakarta - 2018.06.03 10:17
Related Products
-
Ordinary Discount Tungsten Rhenium Thermocouple...
-
Competitive Price for Tungsten Bar Stock - 99....
-
New Arrival China Pure Tantalum And Alloy Tanta...
-
High definition Pure Tungsten Crucibles Supplie...
-
2022 New Style Tungsten Rod For Stainless Steel...
-
Factory selling Tungsten Filament Wire - Tungs...
Write your message here and send it to us