Chinese Professional Heating Elements For Furnace - Electrode for Electromagnetic Flowmeter – WINNERS
Chinese Professional Heating Elements For Furnace - Electrode for Electromagnetic Flowmeter – WINNERS Detail:
Product Description
The (integrated) electromagnetic flowmeter consists of a sensor and a converter. It is based on Faraday’s law of electromagnetic induction and is used to measure the volume flow of conductive liquids with a conductivity greater than 5μS/cm. It is an inductive instrument for measuring the volume flow of conductive media. In addition to measuring the volume flow of general conductive liquids, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali, and uniform liquid-solid two-phase suspension liquids such as mud, ore pulp, and paper pulp.
The signal electrode is thoroughly electrostatically shielded to ensure that the small signal will not be disturbed by the coil and to ensure the measurement accuracy of low flow rate.
Product Parameters
| Products name | Electrode for flowmeter |
| Available material | Tantalum, HC276, Titanium, SS316L |
| MOQ | 20 pieces |
| Single electrode size | M3,M5, M8 |
| Grounding electrode | DN25~DN350 |
Electromagnetic flowmeter electrode material types:
1. 316L(Domestic water, industrial water, raw well water, urban sewage,Corrosive acid, alkali, salt solution).
2. Hastelloy B and Hastelloy C(Resistant to oxidizing acid, oxidizing salt, seawater, non-oxidizing acid, non-oxidizing salt, alkali, sulfuric acid at room temperature.).
3. Titanium(Resistant to seawater, various chlorides and hypochlorous hydrochloric acid, chlorinated acids (including fuming nitric acid), organic acids, alkalis).
4. Tantalum(Resistant to other chemical media except hydrofluoric acid, fuming sulfuric acid and alkali, including boiling point hydrochloric acid, nitric acid and sulfuric acid below 175℃.).
Picture show
Signal electrode
Grounding Electrode
Application
● For electromagnetic flowmeters
Order Information
Inquiries and orders should include the following information
● Signal electrode (Thread size, length)
● Grounding electrode(DN No, thickness)
● Quantity
Product detail pictures:
Related Product Guide:
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Chinese Professional Heating Elements For Furnace - Electrode for Electromagnetic Flowmeter – WINNERS , The product will supply to all over the world, such as: Mongolia, Florence, Swaziland, In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
By Doris from Buenos Aires - 2018.11.04 10:32
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Jonathan from Portugal - 2017.03.28 12:22
