High reputation Molybdenum Electrode Rod - Molybdenum heat shield – WINNERS

REQUEST A QUOTE

Product Detail

Product Tags

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our enterprise to the long-term to produce together with clients for mutual reciprocity and mutual profit for Tungsten Rod For Stainless Steel, titanium target for coating, metal membrane, Our company quickly grew in size and reputation because of its absolute dedication to high quality manufacturing, high value of products and excellent customer service.

High reputation Molybdenum Electrode Rod - Molybdenum heat shield – WINNERS Detail:

Product Description

As the heat insulation component in the vacuum furnace , the biggest function of the heat shield is to block and reflect the heat in the furnace . Therefore , high-purity , accurate size , smooth surface, easy assembly , and reasonable design of heat shields are very important . Molybdenum heat shields are generally produced and processed with 0.5-1.2 mm molybdenum sheets . Generally, there are 4-6 layers. The inner layer of the furnace is made of high-temperature molybdenum TZM material with a thickness of 1.2 mm . Molybdenum strips are used to separate the layers with a space of 7mm . Other molybdenum heat shields are made of 0.5 – 0.8 mm MO1 material . Fasten them with molybdenum screws or molybdenum wire rods.

Molybdenum heat shield

Product Parameters

Products name	Molybdenum heat shield
Available material	Tungsten、Molybdenum、MoLaTZM、SS304(Stainless steel)
Thicknes	0.2~0.5~1mm

Design points of metal heat shield

Material thermal properties	The maximum temperature of the selected metal material should be greater than the ambient working temperature, and the thermal deformation of the metal should be small. When the temperature is higher than 900℃, tungsten, molybdenum and tantalum sheets are generally used. Below 900℃, stainless steel sheet is generally used
material blackness	Choose a material with low blackness, the reflection effect of the surface is better, and the surface finish is higher.
Material thickness	The thickness of the screen should be as thin as possible. Molybdenum is generally 0.2~0.5mm, and stainless steel sheet is generally 0.5~1mm
material price	Under the condition of meeting the working temperature, the cost should be considered
Determination of the number of layers of heat shield	With the increase of the number of layers, the heat loss will decrease, the cost will increase, the structure will be complicated, and the vacuum degree will be more difficult to meet the working requirements. Increase to three layers to improve about 8%. The number of layers is not the better, and it should be considered comprehensively. The working temperature is 1000 ℃, and a maximum of 6 layers of screens can be used.
Spacing between each layer of heat shield	The spacing should be minimized. The thermal effect of increasing the distance is not large. If the spacing is too small, the two layers of heat shields will be connected together due to thermal deformation. Reduce the spacing, generally about 10mm
connection between each layer	Each layer of heat shield should be connected, and it should be ensured that the contact area of the connection is not too large, which will reduce the thermal efficiency. Use bushings and washers to connect each layer.
Maintenance of heat shields	The heat shield should be designed to be easily removable, and the thermal expansion and contraction properties of the material should also be considered.
The distance between the first screen and the radiating surface	Generally 50~100mm
The distance between the outermost screen and the circulating water wall	Generally 100~150mm

Order Information

Inquiries and orders should include the following information
● Drawing of the Molybdenum isolation screen
● Material of the screen( W, Mo, Ta or SS304)
● Quantity

Product detail pictures:

Related Product Guide:

Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for High reputation Molybdenum Electrode Rod - Molybdenum heat shield – WINNERS , The product will supply to all over the world, such as: Argentina, Moscow, Sydney, With the development and enlargement of mass clients abroad, now we've set up cooperative relationships with many major brands. We've our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost items and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.

Molybdenum Crucible Mo