Chinese wholesale Molybdenum Tzm Rods - Molybdenum heat shield – WINNERS

REQUEST A QUOTE

Product Detail

Product Tags

Feedback (2)

We've numerous great employees customers excellent at promoting, QC, and working with kinds of troublesome difficulty inside the generation method for Ground Molybdenum Rod, molybdenum tube, 99.7% Gr1 Ti targets, Only for accomplish the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment.

Chinese wholesale Molybdenum Tzm Rods - Molybdenum heat shield – WINNERS Detail:

Product Description

As the heat insulation component in the vacuum furnace , the biggest function of the heat shield is to block and reflect the heat in the furnace . Therefore , high-purity , accurate size , smooth surface, easy assembly , and reasonable design of heat shields are very important . Molybdenum heat shields are generally produced and processed with 0.5-1.2 mm molybdenum sheets . Generally, there are 4-6 layers. The inner layer of the furnace is made of high-temperature molybdenum TZM material with a thickness of 1.2 mm . Molybdenum strips are used to separate the layers with a space of 7mm . Other molybdenum heat shields are made of 0.5 – 0.8 mm MO1 material . Fasten them with molybdenum screws or molybdenum wire rods.

Molybdenum heat shield

Product Parameters

Products name	Molybdenum heat shield
Available material	Tungsten、Molybdenum、MoLaTZM、SS304(Stainless steel)
Thicknes	0.2~0.5~1mm

Design points of metal heat shield

Material thermal properties	The maximum temperature of the selected metal material should be greater than the ambient working temperature, and the thermal deformation of the metal should be small. When the temperature is higher than 900℃, tungsten, molybdenum and tantalum sheets are generally used. Below 900℃, stainless steel sheet is generally used
material blackness	Choose a material with low blackness, the reflection effect of the surface is better, and the surface finish is higher.
Material thickness	The thickness of the screen should be as thin as possible. Molybdenum is generally 0.2~0.5mm, and stainless steel sheet is generally 0.5~1mm
material price	Under the condition of meeting the working temperature, the cost should be considered
Determination of the number of layers of heat shield	With the increase of the number of layers, the heat loss will decrease, the cost will increase, the structure will be complicated, and the vacuum degree will be more difficult to meet the working requirements. Increase to three layers to improve about 8%. The number of layers is not the better, and it should be considered comprehensively. The working temperature is 1000 ℃, and a maximum of 6 layers of screens can be used.
Spacing between each layer of heat shield	The spacing should be minimized. The thermal effect of increasing the distance is not large. If the spacing is too small, the two layers of heat shields will be connected together due to thermal deformation. Reduce the spacing, generally about 10mm
connection between each layer	Each layer of heat shield should be connected, and it should be ensured that the contact area of the connection is not too large, which will reduce the thermal efficiency. Use bushings and washers to connect each layer.
Maintenance of heat shields	The heat shield should be designed to be easily removable, and the thermal expansion and contraction properties of the material should also be considered.
The distance between the first screen and the radiating surface	Generally 50~100mm
The distance between the outermost screen and the circulating water wall	Generally 100~150mm

Order Information

Inquiries and orders should include the following information
● Drawing of the Molybdenum isolation screen
● Material of the screen( W, Mo, Ta or SS304)
● Quantity

Product detail pictures:

Related Product Guide:

Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Chinese wholesale Molybdenum Tzm Rods - Molybdenum heat shield – WINNERS , The product will supply to all over the world, such as: Bandung, Suriname, Swaziland, Our products have won an excellent reputation at each of the related nations. Because the establishment of our firm. we have insisted on our production procedure innovation together with the most recent modern day managing method, attracting a sizable quantity of talents within this industry. We regard the solution good quality as our most vital essence character.

Black Molybdenum Rod

Molybdenum and Tungsten Crucibles

Molybdenum Electrode Rod

Molybdenum Fastener

Molybdenum Liner

Molybdenum Plate Strip

Molybdenum Spun Crucible

Molybdenum Supporting Rod And Cap

molybdenum wire

Molybdenum Wire Manufacture

This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.