China Manufacturer for Flush Diaphragm - Electrode for Electromagnetic Flowmeter – WINNERS

Product Description

The (integrated) electromagnetic flowmeter consists of a sensor and a converter. It is based on Faraday’s law of electromagnetic induction and is used to measure the volume flow of conductive liquids with a conductivity greater than 5μS/cm. It is an inductive instrument for measuring the volume flow of conductive media. In addition to measuring the volume flow of general conductive liquids, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali, and uniform liquid-solid two-phase suspension liquids such as mud, ore pulp, and paper pulp.

The signal electrode is thoroughly electrostatically shielded to ensure that the small signal will not be disturbed by the coil and to ensure the measurement accuracy of low flow rate.

Product Parameters

Electromagnetic flowmeter electrode material types:
1. 316L(Domestic water, industrial water, raw well water, urban sewage,Corrosive acid, alkali, salt solution).
2. Hastelloy B and Hastelloy C(Resistant to oxidizing acid, oxidizing salt, seawater, non-oxidizing acid, non-oxidizing salt, alkali, sulfuric acid at room temperature.).
3. Titanium(Resistant to seawater, various chlorides and hypochlorous hydrochloric acid, chlorinated acids (including fuming nitric acid), organic acids, alkalis).
4. Tantalum(Resistant to other chemical media except hydrofluoric acid, fuming sulfuric acid and alkali, including boiling point hydrochloric acid, nitric acid and sulfuric acid below 175℃.).

Picture show

Signal electrode

Grounding Electrode

Application

● For electromagnetic flowmeters

Order Information

Inquiries and orders should include the following information
● Signal electrode (Thread size, length)
● Grounding electrode(DN No, thickness)
● Quantity